Sustainable PEG-Incorporated Membranes Derived from Expanded Polystyrene Waste for Efficient Microalgae Separation

Sustainable PEG-Incorporated Membranes Derived from Expanded Polystyrene Waste for Efficient Microalgae Separation

ES评分 0

DOI 10.20900/jsr20260050
刊名
JSR
年,卷(期) 2026, 8(2)
作者
作者单位

Centre for Innovation of Medical Equipment and Devices (CIMEDs), Faculty of Engineering, Universitas Gadjah Mada, Yogyakarta 55281, Indonesia Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Surabaya 60115, Indonesia Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Yogyakarta 55281, Indonesia Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia Department of Mechanical Engineering, Keio University, Kanagawa 223-8522, Japan Department of Research and Development, PT Global Meditek Utama-IITOYA, Yogyakarta 55581, Indonesia Research Group of Industrial Management, System Engineering & Manufacturing, Universitas Airlangga, Surabaya 60115, Indonesia

摘要
The production of expanded polystyrene (EPS) continues to increase due to its widespread use, particularly in single-use food packaging, while its extremely slow degradation in landfills contributes to persistent environmental problems. In this study, EPS waste was recycled into functional flat-sheet membranes for microalgae separation as part of a potential wastewater treatment application. To improve membrane structure and performance, polyethylene glycol (PEG) was incorporated into the EPS casting solution as a hydrophilic additive. A series of membranes containing 0–20 wt.% PEG were fabricated via nonsolvent-induced phase separation (NIPS). PEG incorporation altered the membrane morphology, reduced the water contact angle from 100.3° to 85.94°, and increased the pure water flux, with the highest value of 283.13 L m−2 h−1 obtained for the membrane containing 20 wt.% PEG. Mechanical performance was also improved relative to the pristine EPS membrane, with the highest tensile strength observed at 15 wt.%. Additional thickness, porosity, and mean pore size data confirmed that PEG promoted more extensive pore development during phase inversion. Importantly, both pristine and PEG-modified membranes maintained near-complete microalgae rejection (≥99%) under all tested conditions, showing that the permeability enhancement was achieved without a measurable loss of separation performance. Moreover, EPS/PEG membranes showed improved flux recovery after microalgae filtration, with the highest FRR 93 ± 8.9% observed for EPS/PEG-15, suggesting improved fouling reversibility. These findings demonstrate a simple and promising waste-valorization route for converting EPS waste into functional membranes suitable for efficient microalgae separation.
Abstract
The production of expanded polystyrene (EPS) continues to increase due to its widespread use, particularly in single-use food packaging, while its extremely slow degradation in landfills contributes to persistent environmental problems. In this study, EPS waste was recycled into functional flat-sheet membranes for microalgae separation as part of a potential wastewater treatment application. To improve membrane structure and performance, polyethylene glycol (PEG) was incorporated into the EPS casting solution as a hydrophilic additive. A series of membranes containing 0–20 wt.% PEG were fabricated via nonsolvent-induced phase separation (NIPS). PEG incorporation altered the membrane morphology, reduced the water contact angle from 100.3° to 85.94°, and increased the pure water flux, with the highest value of 283.13 L m−2 h−1 obtained for the membrane containing 20 wt.% PEG. Mechanical performance was also improved relative to the pristine EPS membrane, with the highest tensile strength observed at 15 wt.%. Additional thickness, porosity, and mean pore size data confirmed that PEG promoted more extensive pore development during phase inversion. Importantly, both pristine and PEG-modified membranes maintained near-complete microalgae rejection (≥99%) under all tested conditions, showing that the permeability enhancement was achieved without a measurable loss of separation performance. Moreover, EPS/PEG membranes showed improved flux recovery after microalgae filtration, with the highest FRR 93 ± 8.9% observed for EPS/PEG-15, suggesting improved fouling reversibility. These findings demonstrate a simple and promising waste-valorization route for converting EPS waste into functional membranes suitable for efficient microalgae separation.
关键词
EPS waste; PEG modification; upcycled membrane; microalgae separation
KeyWord
EPS waste; PEG modification; upcycled membrane; microalgae separation
基金项目
页码 -
  • 参考文献
  • 相关文献
  • 引用本文

Ario Sunar Baskoro, Budi Arifvianto, Diah Mahmuda, Gunawan Setia Prihandana, Ikhsan Nur Khafifi, Muslim Mahardika, Norihisa Miki, Tutik Sriani. Sustainable PEG-Incorporated Membranes Derived from Expanded Polystyrene Waste for Efficient Microalgae Separation [J]. Journal of Sustainability Research. 2026; 8; (2). - .

  • 文献评论

相关学者

相关机构