附加时序InSAR监测形变约束的渐进式滑坡滑动面参数反演

Inversion of Progressive Landslide Sliding Surface Parameters with Additional Time-Series InSAR Monitoring of Deformation Constraints

ES评分 0

DOI 10.14075/j.jgg.2025.03.089
刊名
Journal of Geodesy and Geodynamics
年,卷(期) 2026, 46(2)
作者
作者单位

1 长安大学地质工程与测绘学院, 西安, 710054;
2 西部矿产资源与地质工程教育部重点实验室, 西安, 710054

摘要
结合InSAR高空间覆盖监测优势与物理简化模型开展滑动面参数的反演研究, 以典型黄土滑坡多发区域甘肃黑方台党川5#渐进式滑坡体为实验区, 借鉴地震学研究领域内利用位错模型反演断层活动参数的思路, 以时序InSAR监测形变作为地表约束, 结合位错模型, 构建一种附加监测形变约束的渐进式滑动面参数反演模型, 从大地测量反演角度确定出党川5#典型滑坡体滑动面位置和几何形态。结果表明, 5#滑坡体滑面位于坡表下约4.83±0.3 m深处, 长度约136.43±0.5 m, 宽度约47.82±0.3 m, 坡向约272°±1.0°, 模型反演拟合度达99%, 与地质调查及统计结果基本吻合。
Abstract
This study integrates the high spatial-resolution monitoring advantages of InSAR with physics-based reduced-order modeling to invert sliding surface parameters. Focusing on the progressive Landslide 5# in Dangchuan, Heifangtai (Gansu province)—a typical loess landslide-prone area—we adapted the fault dislocation model from seismology to develop a novel inversion framework. By incorporating time-series InSAR deformation as surface constraints into the dislocation model, the method progressively inverts sliding surface geometry and position from a geodetic perspective. The results indicate that the sliding surface of the 5# landslide mass is located approximately 4.83±0.3 m beneath the slope surface, with a length of about 136.43±0.5 m, a width of around 47.82±0.3 m, and an aspect of approximately 272°±1.0°. The model inversion achieved a fitting degree of 99%, which is generally consistent with the results of geological surveys and statistical analyses.
关键词
渐进式滑坡; 滑动面; SBAS-InSAR; 位错模型; 参数反演
KeyWord
progressive landslide; sliding surface; SBAS-InSAR; dislocation model; parameter inversion
基金项目
页码 148-154
  • 参考文献
  • 相关文献
  • 引用本文

胡燕晶, 瞿伟, 韦志航, 徐荣堂, 李久元. 附加时序InSAR监测形变约束的渐进式滑坡滑动面参数反演 [J]. 大地测量与地球动力学. 2026; 46; (2). 148 - 154.

  • 文献评论

相关学者

相关机构