走滑型平行组合断层源几何参数与重力变化图像特征定量关系的模拟研究

Simulation of the Quantitative Relationship between Geometric Parameters of Strike-Slip Parallel Composite Fault Sources and Image Characteristics of Gravity Variations

ES评分 0

DOI 10.14075/j.jgg.2025.09.311
刊名
Journal of Geodesy and Geodynamics
年,卷(期) 2026, 46(6)
作者
作者单位

1 湖南省地震局, 长沙, 410004;
2 中国地震局地震研究所, 武汉, 430071;
3 江苏省地震局, 南京, 210014

摘要
在弹性地球下,单条走滑断层产生的地表重力变化已有清晰的解析解,但多条断裂带及其几何参数与地表重力变化图像之间的定量关系目前尚不明确。本文基于弹性半无限空间中的位错理论,通过模拟计算,系统研究走滑型平行组合位错源的几何参数与地表重力变化图像特征之间的定量关系。通过控制变量法,分别分析断层长度(L)、宽度(W)、走滑宽度(K)、断层条数(N)、倾角(δ)及顶深(dep)等参数对重力异常四象限分布形态与幅值的影响。结果表明:1)断层长度L与沿断层走向(X方向)的重力极值点间距呈线性正相关;2)断层宽度W增加会提高重力异常幅值,但增长趋势呈递减的特征,且不改变四象限结构;3)走滑宽度K与Y方向的重力极值点间距呈线性正相关,而与重力异常幅值呈负相关;4)走滑断层个数N增加使重力变化幅值线性增长;5)倾角δ变化影响重力变化图像的对称性;6)顶深dep增加导致Y方向极值点间距显著增大;7)断层中心位置(sx,sy)与重力变化图像的四象限对称中心一致,X方向一对极值点连线方向与断层走向α一致。综上,可根据观测的重力变化图像确定多位错源的主要几何参数。
Abstract
Under an elastic Earth model, clear analytical solutions exist for surface gravity changes induced by a single strike-slip fault. However, the quantitative relationship between multiple fault zones and their geometric parameters with the resulting surface gravity change patterns remains unclear. Based on dislocation theory in an elastic half-space, this paper systematically investigates the quantitative connection between the geometric parameters of parallel strike-slip dislocation sources and the characteristics of the surface gravity change patterns through numerical simulations. Using the control variable method, we separately analyze the influence of fault length (L), width (W), slip amount (K), number of faults (N), dip angle (δ), and top depth (dep) on the four-quadrant distribution pattern and amplitude of the gravity anomaly. The results show that: 1) Fault length L is linearly positively correlated with the distance between gravity extremal points along the fault strike (X-direction). 2) Increasing fault width W elevates the gravity anomaly amplitude, but the growth trend diminishes, without altering the four-quadrant structure. 3) The strike-slip width K is linearly positively correlated with the distance between gravity extremal points along the Y-direction, but negatively correlated with the gravity anomaly amplitude. 4) An increase in the number of strike-slip faults N leads to a linear increase in the gravity change amplitude. 5) Variations in the dip angle δ affect the symmetry of the gravity change pattern. 6) An increase in the top depth dep causes a significant increase in the distance between extremal points in the Y-direction. 7) The fault center position (sx, sy) coincides with the four-quadrant symmetric center of the gravity change pattern, and the line connecting a pair of extremal points in the X-direction aligns with the fault strike angle α. In summary, the main geometric parameters of multiple dislocation sources can be determined based on observed gravity change patterns.
关键词
走滑断层; 平行组合断层; 震源几何参数; 重力变化; 弹性半无限空间位错模型
KeyWord
strike-slip fault; parallel composite faults; geometry parameters of the earthquake source; gravity variations; elastic semi-infinite space dislocation model
基金项目
页码 728-736
  • 参考文献
  • 相关文献
  • 引用本文

金雯, 申重阳, 谈洪波, 王嘉沛, 石文轩, 谭青青, 晏绮云. 走滑型平行组合断层源几何参数与重力变化图像特征定量关系的模拟研究 [J]. 大地测量与地球动力学. 2026; 46; (6). 728 - 736.

  • 文献评论

相关学者

相关机构