Polypropylene Fibers in Pavement Concrete: Mechanical, Durability, and Sustainability Review

Polypropylene Fibers in Pavement Concrete: Mechanical, Durability, and Sustainability Review

ES评分 0

DOI 10.20900/jsr20260074
刊名
JSR
年,卷(期) 2026, 8(3)
作者
作者单位

Civil Engineering Department, Faculty of Engineering, Islamic University of Gaza, P.O. Box 108, Gaza Strip, PalestineDepartment of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia

摘要
Polypropylene fibers (PPF) are attracting growing interest as a reinforcement for concrete pavements, where their low cost, corrosion resistance, and chemical inertness address several of the intrinsic weaknesses of plain Portland cement concrete. This review consolidates laboratory, field, and standardized-test evidence on how PPF influence the mechanical performance, durability, and sustainability of pavement concrete. Across the collected studies, PPF contribute only modest gains in compressive strength but substantial improvements in flexural and tensile behavior, fracture toughness, and energy absorption, together with marked reductions in plastic and drying shrinkage and enhanced resistance to impact, abrasion, skid wear, and freeze–thaw and chemical exposure. These effects are most pronounced within an effective dosage range of roughly 0.3%–1.0% by volume, beyond which reduced workability, dispersion difficulties, and the low elastic modulus of polypropylene begin to offset the benefits. Collectively, they extend service life and lower maintenance demand, particularly under the repeated and moving loads characteristic of pavements, and can permit thinner sections at equivalent load capacity. Hybrid systems combining PPF with steel, basalt, nano-silica, or recycled constituents recover complementary properties and perform well in high-demand applications such as airport runways, bridge decks, and tunnel linings. From a sustainability standpoint, PPF reduces plastic waste and carries lower embodied energy and carbon than steel reinforcement, and life-cycle assessments report emissions and cost savings at optimized dosages. The review identifies fiber surface treatment, mix-design optimization, and machine-learning-based performance prediction as the principal routes to overcoming current limitations, and highlights hybrid and multi-scale composites, self-monitoring fiber systems, and improved PPF formulations as priorities for future research toward durable, low-impact pavement infrastructure.
Abstract
Polypropylene fibers (PPF) are attracting growing interest as a reinforcement for concrete pavements, where their low cost, corrosion resistance, and chemical inertness address several of the intrinsic weaknesses of plain Portland cement concrete. This review consolidates laboratory, field, and standardized-test evidence on how PPF influence the mechanical performance, durability, and sustainability of pavement concrete. Across the collected studies, PPF contribute only modest gains in compressive strength but substantial improvements in flexural and tensile behavior, fracture toughness, and energy absorption, together with marked reductions in plastic and drying shrinkage and enhanced resistance to impact, abrasion, skid wear, and freeze–thaw and chemical exposure. These effects are most pronounced within an effective dosage range of roughly 0.3%–1.0% by volume, beyond which reduced workability, dispersion difficulties, and the low elastic modulus of polypropylene begin to offset the benefits. Collectively, they extend service life and lower maintenance demand, particularly under the repeated and moving loads characteristic of pavements, and can permit thinner sections at equivalent load capacity. Hybrid systems combining PPF with steel, basalt, nano-silica, or recycled constituents recover complementary properties and perform well in high-demand applications such as airport runways, bridge decks, and tunnel linings. From a sustainability standpoint, PPF reduces plastic waste and carries lower embodied energy and carbon than steel reinforcement, and life-cycle assessments report emissions and cost savings at optimized dosages. The review identifies fiber surface treatment, mix-design optimization, and machine-learning-based performance prediction as the principal routes to overcoming current limitations, and highlights hybrid and multi-scale composites, self-monitoring fiber systems, and improved PPF formulations as priorities for future research toward durable, low-impact pavement infrastructure.
关键词
polypropylene fiber; fiber-reinforced concrete; concrete pavements; shrinkage control; crack resistance; mechanical properties; sustainability; recycled aggregates; hybrid fibers; durability
KeyWord
polypropylene fiber; fiber-reinforced concrete; concrete pavements; shrinkage control; crack resistance; mechanical properties; sustainability; recycled aggregates; hybrid fibers; durability
基金项目
页码 -
  • 参考文献
  • 相关文献
  • 引用本文

Abdeliazim Mustafa Mohamed, Bassam A. Tayeh. Polypropylene Fibers in Pavement Concrete: Mechanical, Durability, and Sustainability Review [J]. Journal of Sustainability Research. 2026; 8; (3). - .

  • 文献评论

相关学者

相关机构