BDS-3/BDS-2及BDS-3+BDS-2高精度控制测量定位性能分析

Positioning Performance Analysis for High-Precision Control Surveying of BDS-3/BDS-2 and BDS-3+BDS-2

ES评分 0

DOI 10.14075/j.jgg.2025.03.081
刊名
Journal of Geodesy and Geodynamics
年,卷(期) 2025, 45(8)
作者
作者单位

1 北京建筑大学测绘与城市空间信息学院,北京市永源路15号,102616;
2 北京市政建设集团有限责任公司,北京市南礼士路17号,100089;
3 国网冀北电力有限公司,北京市枣林前街32号,100053;
4 北京市首都公路发展集团有限公司公路资产管理分公司,北京市京哈高速田家府服务区,101149

摘要
建立BDS传递起算基准控制测量模型,比较分析BDS-3/BDS-2和BDS-3+BDS-2高精度控制测量定位性能差异。选择北京某工程9个首级控制点和中国及周边3个IGS跟踪站建立一种同时支持GPS与BDS-3/BDS-2信号的高精度控制测量定位网,选取2023年doy153-155连续观测的3个时段数据,设计4种方案进行数据处理,从起算基准传递结果和控制测量平差结果2个方面作定位性能比较分析。结果表明,相比于GPS,BDS-3和BDS-3+BDS-2在N向、E向、U向、平面和点位上较差均仅存在mm级的差异,而BDS-2在U向和点位上较差存在mm至cm级差异,在N向、E向及平面上存在mm级差异; BDS-3测量精度与BDS-3+BDS-2基本相当,BDS-2测量精度稍差,特别是在U向。
Abstract
By establishing a BDS transmission reference control surveying model, the paper compares and analyzes the high-precision control surveying positioning performance differences between BDS-3/BDS-2 and BDS-3+BDS-2. Nine first-order control points of a project in Beijing and three IGS tracking stations in China and its surrounding areas were selected to establish a high-precision control surveying positioning network that supports both GPS and BDS-3/BDS-2 signals. Continuous observation data from three time periods(days 153-155 of 2023) were selected, and four schemes were designed for data processing. The positioning performance was compared and analyzed from two aspects: the transmission results of the initial reference and the adjustment results of control surveying. The results show that compared with GPS, BDS-3 and BDS-3+BDS-2 have only millimeter-level differences in N, E, U, horizontal, and point directions, while BDS-2 has differences ranging from millimeters to centimeters in the U and point directions, and only millimeter-level differences in the N, E, and horizontal directions. The measurement accuracy of BDS-3 is basically equivalent to that of BDS-3+BDS-2, while BDS-2 has lower accuracy than the other two, especially in the U direction.
关键词
BDS; 基线处理; 网平差; 起算基准传递; 控制测量精度
KeyWord
BDS; baseline processing; network adjustment; starting datum transfer; control surveying accuracy
基金项目
页码 796-805
  • 参考文献
  • 相关文献
  • 引用本文

周命端, 宋峤, 白岩松, 孟庆龙, 吴舜, 刘明华, 张驰. BDS-3/BDS-2及BDS-3+BDS-2高精度控制测量定位性能分析 [J]. 大地测量与地球动力学. 2025; 45; (8). 796 - 805.

  • 文献评论

相关学者

相关机构