羧甲基壳聚糖/还原氧化石墨烯复合支架的孔径结构对MC3T3-E1细胞增殖的作用-国际医学与数据杂志-CSCIED科技核心评价数据库-手机版

羧甲基壳聚糖/还原氧化石墨烯复合支架的孔径结构对MC3T3-E1细胞增殖的作用

Effect of Pore Size Structure of Carboxymethyl Chitosan/Reduced Graphene Oxide Composite Scaffolds on MC3T3-E1 Cell Proliferation

ES评分 0 浏览量：258 下载量：0

全文阅读下载引用收藏

DOI	10.12208/j.ijmd.20260052
刊名	国际医学与数据杂志 International Journal of Medicine and Data
年，卷(期)	2026, 10(2)
作者	周荣汇,
作者单位	福建医科大学附属口腔医院福建福州;
摘要	目的探讨不同浓度还原氧化石墨烯（rGO）对羧甲基壳聚糖（CMC）支架孔径的调控作用，分析孔径变化与MC3T3-E1细胞增殖之间的关系。方法采用溶液共混结合冷冻干燥技术，制备rGO质量分数分别为0%、0.5%、1%和2%的CMC-rGO复合支架。通过扫描电镜观察支架微观形貌及孔径分布，使用ImageJ软件测量平均孔径。将MC3T3-E1成骨前体细胞与各组支架共培养，采用CCK-8法检测培养第1、3、5、7天的细胞增殖活性。结果扫描电镜显示，纯CMC支架孔径小于70μm，结构呈不规则卷曲；0.5%和1% rGO使支架孔径增大至70-120μm，孔壁光滑规整；2% rGO则导致孔径显著减小、结构趋于致密化。CCK-8结果显示，0.5% rGO组细胞活性在各时间点均显著高于纯CMC组（P<0.05），1% rGO组与纯CMC组无显著差异，2% rGO组持续低于纯CMC组（P<0.05）。结论 rGO对CMC支架孔径的调控呈非线性特征，0.5%-1% rGO可形成70-120μm的适宜孔径范围，该结构有利于细胞增殖。0.5%组因孔径分布更为均匀，综合效果最优。本研究为羧甲基壳聚糖基骨修复材料的孔径设计提供了实验依据。
Abstract	Objective To investigate the regulatory effect of different concentrations of reduced graphene oxide (rGO) on the pore size of carboxymethyl chitosan (CMC) scaffolds and to analyze the relationship between pore size changes and MC3T3-E1 cell proliferation. Methods CMC-rGO composite scaffolds with rGO mass fractions of 0%, 0.5%, 1%, and 2% were prepared by solution blending combined with freeze-drying technology. The microstructure and pore size distribution of the scaffolds were observed by scanning electron microscopy, and the average pore size was measured using ImageJ software. MC3T3-E1 osteoblast precursor cells were co-cultured with the scaffolds, and cell proliferation activity was detected by Cell Counting Kit-8 (CCK-8) assay on days 1, 3, 5, and 7. Results Scanning electron microscopy showed that the pure CMC scaffold had a pore size of less than 70 μm with an irregular curled structure. Addition of 0.5% and 1% rGO increased the pore size to 70-120 μm with smooth and regular pore walls, while 2% rGO led to a significant reduction in pore size and structural densification. CCK-8 results showed that cell viability in the 0.5% rGO group was significantly higher than that in the pure CMC group at all time points (P<0.05), the 1% rGO group showed no significant difference compared with the pure CMC group, and the 2% rGO group was consistently lower than the pure CMC group (P<0.05). Conclusion rGO exhibits a nonlinear regulatory effect on the pore size of CMC scaffolds. The 0.5%-1% rGO concentration range forms a favorable pore size range of 70-120 μm, which facilitates cell proliferation. The 0.5% group exhibits more uniform pore size distribution and achieves the best overall effect. This study provides experimental evidence for the pore size design of carboxymethyl chitosan-based bone repair materials.
关键词	羧甲基壳聚糖；还原氧化石墨烯；孔径；细胞增殖
KeyWord	Carboxymethyl chitosan; Reduced graphene oxide; Pore size; Cell proliferation
基金项目
页码	60-64

参考文献
相关文献

[1] Misch CM. Autogenous Bone is Still the Gold Standard of Graft Materials in 2022. J Oral Implantol. 2022;48(3):169-170.

[2] Zhao J, Zhou YH, Zhao YQ, et al. Oral cavity-derived stem cells and preclinical models of jaw-bone defects for bone tissue engineering. Stem Cell Res Ther. 2023;14(1):39.

[3] Shariatinia Z. Carboxymethyl chitosan: Properties and biomedical applications. Int J Biol Macromol. 2018;120(Pt B):1406-1419.

[4] Agarwal T, Narayan R, Maji S, et al. Gelatin/Carboxymethyl chitosan based scaffolds for dermal tissue engineering applications. Int J Biol Macromol. 2016;93(Pt B):1499-1506.

[5] He Y, Li Y, Chen G, et al. Concentration-dependent cellular behavior and osteogenic differentiation effect induced in bone marrow mesenchymal stem cells treated with magnetic graphene oxide. J Biomed Mater Res A. 2020;108(1):50-60.

[6] Zhang X, Wei C, Li Y, et al. Dose-dependent cytotoxicity induced by pristine graphene oxide nanosheets for potential bone tissue regeneration. J Biomed Mater Res A. 2020;108(3):614-624.

[7] Roseti L, Parisi V, Petretta M, et al. Scaffolds for Bone Tissue Engineering: State of the art and new perspectives. Mater Sci Eng C Mater Biol Appl. 2017;78:1246-1262.

[8] Mukasheva F, Adilova L, Dyussenbinov A, et al. Optimizing scaffold pore size for tissue engineering: insights across various tissue types. Front Bioeng Biotechnol. 2024;12:1444986.

[9] Valencia C, Valencia CH, Zuluaga F, et al. Synthesis and Application of Scaffolds of Chitosan-Graphene Oxide by the Freeze-Drying Method for Tissue Regeneration. Molecules. 2018;23(10):2651.

[10] Wong S, Lim SS, Tiong TJ, et al. Preliminary In Vitro Evaluation of Chitosan-Graphene Oxide Scaffolds on Osteoblastic Adhesion, Proliferation, and Early Differentiation. Int J Mol Sci. 2020;21(15):5202.

[11] Zhang Y, Zhang M, Jiang H, et al. Bio-inspired layered chitosan/graphene oxide nanocomposite hydrogels with high strength and pH-driven shape memory effect. Carbohydr Polym. 2017;177:116-125.

[12] Sun J, Chen C, Zhang B, Yao C, Zhang Y. Advances in 3D-printed scaffold technologies for bone defect repair: materials, biomechanics, and clinical prospects. Biomed Eng Online. 2025;24(1):51.

[13] Shamekhi MA, Mirzadeh H, Mahdavi H, et al. Graphene oxide containing chitosan scaffolds for cartilage tissue engineering. Int J Biol Macromol. 2019;127:396-405.

[14] Lei H, Zhou Z, Liu J, et al. Structural Optimization of 3D-Printed Porous Titanium Implants Promotes Bone Regeneration for Enhanced Biological Fixation. ACS Appl Mater Interfaces. 2025;17(12):18059-18073.

[15] Zhou K, Yu P, Shi X, et al. Hierarchically Porous Hydroxyapatite Hybrid Scaffold Incorporated with Reduced Graphene Oxide for Rapid Bone Ingrowth and Repair. ACS Nano. 2019;13(8):9595-9606.

引用本文

周荣汇. 羧甲基壳聚糖/还原氧化石墨烯复合支架的孔径结构对MC3T3-E1细胞增殖的作用 [J]. 国际医学与数据杂志. 2026; 10; (2). 60 - 64.

文献评论

相关学者

相关机构