吸附性机制指导下生物功能性修复系统在全口义齿中的应用-国际口腔科学研究-CSCIED科技核心评价数据库-手机版

吸附性机制指导下生物功能性修复系统在全口义齿中的应用

The application of biofunctional prosthetic system in complete denture under the guidanceof adsorption mechanism

ES评分 0 浏览量：637 下载量：0

DOI	10.12208/j. iosr.20220007
刊名	国际口腔科学研究 International Oral Science Research
年，卷(期)	2022, 1(1)
作者	骆树怡,高翔*,
作者单位	内蒙古医科大学内蒙古呼和浩特 ; 包头医学院口腔医学院内蒙古包头 ;
摘要	全口义齿的固位稳定一直是临床修复工作的一大难点。随着口腔材料的不断发展及新技术的广泛交流，全口义齿修复的方法也在逐渐增多并优化。生物功能性修复系统（BPS）是目前较为先进的义齿制作系统，有着高质量材料设备和模式化制作程序，与吸附性机制相结合应用于牙槽嵴低平患者取得了良好的临床修复效果。本文主要对吸附性机制指导下生物功能性修复系统在全口义齿中的应用加以综述，以期为临床修复治疗提供参考。
Abstract	The retention stability of complete denture is always a difficulty in clinical prostheses. With the continuous development of oral materials and the wide exchange of new technologies, the methods of complete denture restoration are gradually increasing and optimizing. Biofunctional prosthetic system (BPS) is an advanced denture fabrication system with high-quality materials and equipment and formalization fabrication procedures, which has achieved good clinical results in patients with low alveolar ridge when combined with adsorption mechanism. This article mainly reviews the application of biofunctional prosthetic system in complete denture under the guidance of adsorption mechanism, in order to provide reference for clinical prosthesis treatment.
关键词	吸附性机制；生物功能性修复系统；全口义齿；牙槽嵴低平
KeyWord	Adsorption mechanism; Biofunctional repair system; Complete denture; Alveolar ridge depression
基金项目
页码	28-33

参考文献
相关文献

[1] Ren C, McGrath C, Yang Y. Edentulism and associated factors among community-dwelling middle-aged and elderly adults in China[J]. Gerodontology, 2017,34(2):195-207.

[2] 赵铱民.口腔修复学[M].第8版.北京.人民卫生出版社, 2020:191.

[3] Feine J S, Carlsson G E, Awad M A, et al. The McGill Consensus Statement on Overdentures[J] Int J Prosthodont 2002, 15: 413-414

[4] Thomason JM, Feine J, Exley C, et al. Mandibular two implant-supported overdentures as the first choice standard of care for edentulous patients--the York Consensus Statement[J]. Br Dent J, 2009,207(4):185-186.

[5] Carlsson GE, Omar R. The future of complete dentures in oral rehabilitation. A critical review[J]. J Oral Rehabil, 2010,37(2):143-156.

[6] Probst LF, Vanni T, Cavalcante DFB, et al. Cost-effectiveness of implant-supported dental prosthesis compared to conventional dental prosthesis[J]. Rev Saude Publica,2019,53:s1518-8787.

[7] Jeffcoat MK. Bone loss in the oral cavity[J] Bone Miner Res,1993, Suppl 2:S467-73.

[8] Huumonen S, Haikola B, Oikarinen K,et al. Residual ridge resorption, lower denture stability and subjective complaints among edentulous individuals[J].J Oral Rehabil, 2012 ,39(5):384-390.

[9] 阿部二郎.骆小平主译.下颌吸附性义齿和BPS临床指南[M].第1版.北京:人民军医出版社,2016:vi;38-64;120-123;219

[10] Wolf L, Bergauer B, Adler W, et al. Three-dimensional evaluation of mandibular deformation during mouth opening[J]. Int J Comput Dent, 2019,22(1):21-27.

[11] Lee Suk Hwan,Leesungbok Richard,Lee Suk Won. Complete denture made with closed-mouth impression technique on severely atrophied edentulous jaw[J].J Korean Acad Prosthodont.,2019,57(2):195.

[12] Jung S, Park C, Yang HS, et al. Comparison of different impression techniques for edentulous jaws using three-dimensional analysis [J]. Adv Prosthodont, 2019, 11(3):179-186.

[13] 杨丽媛,刘冠邑,赵凌,等.3种方法确定水平颌位关系的全口义齿准确性比较[J].华西口腔医学杂志,2020,38(04):404-409.

[14] Someya S.The anatomical study of the sinew string observed on the buccal mucosa of mandibular second molar and posterior of retromolar pad[J]. Jpn Acad Gnathol Occlsion,2008,28(1-2):14-20.

[15] 樊勤,于金华,李娜.舌侧集中全口义齿修复低矮牙槽嵴的临床体会[J].临床口腔医学杂志,2021,37(02):90-93.

[16] Abduo J. Occlusal schemes for complete dentures: a systematic review[J]. Int Prosthodont, 2013,26(1):26-33.

[17] 苗丽亚,艾红军.舌侧集中牙合与解剖式双侧平衡牙合全口义齿修复低平牙槽嵴无牙颌患者咀嚼效率及咬合力比较研究[J].中国实用口腔科杂志,2014,7(03):168-171.

[18] CHMIELEWSKA M. OKONSKI P. Biofunctional prosthetic system in implant-prosthetic treatment[J]. Protetyka Stomatologiczna, 2016,66(6):418-429.

[19] 程昕,常亮,王丹.新型义齿注塑法与传统义齿制作法的对比研究[J].全科口腔医学电子杂志,2018,5(14):5-6+9.

[20] Keenan PL, Radford DR, Clark RK. Dimensional change in complete dentures fabricated by injection molding and microwave processing [J]. Prosthet Dent, 2003, 89(1):37-44.

[21] 杨敏.BPS系统制作吸附义齿与常规全口义齿的临床疗效对比研究[D].昆明医科大学,2020.

[22] 李玥,王栋,张红.生物功能性修复系统在全口义齿中的临床应用效果初步评价[J].口腔颌面修复学杂志,2020,21(01):23-27

[23] 廖雯,王雪.传统方法修复全口义齿与吸附性全口义齿修复在牙槽嵴低平患者中的应用效果比较[J].临床医学研究与实践,2021,6(24):108-110.

[24] 邓钰玮,文晋,赵军,等.56例成人牙列缺失患者生物功能性全口义齿治疗的满意度及修复效果评价[J].上海口腔医学,2021,30(03):328-331.

[25] 许慧芬,李伟,邱元香,等.两种全口义齿修复方法的临床应用效果[J].临床口腔医学杂志,2021,37(08):488-491.

[26] 贾爽,叶荣荣,王德芳,等.生物功能性全口义齿修复牙列缺失的临床疗效评估[J].中国美容医学,2020,29(03):119-122.

[27] Nekora-Azak A, Evlioglu G, Ozdemir-Karataş M, et al. Use of biofunctional prosthetic system following partial maxillary resection: a clinical report[J].J Oral Rehabil, 2005,32(9):693-695.

[28] Piotr Okoński, Dariusz Rolski, Katarzyna Lasek, et al. Application of Biofunctional Method in prosthetic rehabilitation of a patient after surgical treatment in the maxillofacial area[J]. Protet Stoma Tol,2011, 4:304-311

[29] Km S. Koli DK. Jain V. et al. Comparison of ridge resorption and patient satistaction in single Implant-supported mandibular over-dentures with conventional complete dentures: a randomised pilot study[J]. J Oral Biol Craniofac Res, 2021, 11(1):71-77.

[30] Oh WS, Saglik B,Bak SY.Bone loss in the posterior edentulous mandible with implant-supported overdentures vs complete dentures:a systematic review and meta-analysis [J].Int J Prosthodont,2020,33(2):184-191.

[31] Ii H. A retrospective study of risk factors for Suction-Effective Mandibular Complete Dentures[J]. J Acad Clin Dentistry, 2016,36:184-191.

[32] Einarsdottir ER, Geminiani A, Chochlidakis K, et al.Dimensional stability of double-processed complete denture bases fabricated with compression molding, injection molding, and CAD-CAM subtraction milling[J]. Prosthet Dent, 2020,124(1):116-121.

[33] Mandelli F, Ferrini F, Gastaldi G, et al.Improvement of a Digital Impression with Conventional Materials: Overcoming Intraoral Scanner Limitations[J].Int Prosthodont, 2017,30(4):373-376.

[34] Bilgin MS, Erdem A, Aglarci OS,et al.Fabricating Complete Dentures with CAD/CAM and RP Technologies[J]. Prosthodont,2015,24(7):576-579.

[35] Wimmer T, Gallus K, Eichberger M, et al.Complete denture fabrication supported by CAD/CAM. [J] Prosthet Dent, 2016,115(5):541-546.

引用本文

骆树怡,高翔*. 吸附性机制指导下生物功能性修复系统在全口义齿中的应用 [J]. 国际口腔科学研究. 2022; 1; (1). 28 - 33.

文献评论

相关学者

相关机构